Podcast #845: SVS Soundpath Wireless Subwoofer Kit
Pretty much from the start we have been searching for wireless solutions to transmit audio from one part of the room to the other. Early attempts have been met with static, pops, and clicks. We have made significant progress over the years and today we are taking a look at the SVS Soundpath Wireless Subwoofer Kit ($90). This product is so simple to use there weren’t even instructions in the box!
SetupConnect the transmitter (clearly labeled on the unit) to the subwoofer output of your receiver via an included RCA cable and then connect the other end (3.5 mm) to the transmitter. The device gets power via USB. If your receiver has a USB connection you can use that otherwise SVS has included a USB power adapter. Do the same thing at the subwoofer and you are done. Place your subwoofer anywhere you want. The signal reached anywhere we put the sub in our medium sized room (15 X 20 ft). Setup time four minutes! SVS also includes double sided 3M tape to help lock down the device.
PerformanceIt just works! We tested down to 15hz up to 85Hz. The device is rated from 6hz to 22KHz but our subwoofer only goes to 15Hz and our crossover is set to 85Hz so that’s all we tested to. We could hear no difference from the wired case nor could we perceive any delay. From our ear’s point of view there was no difference in performance.
HT Guys RecommendationThe SVS SoundPath Wireless Subwoofer Subwoofer Kit unlocks the potential of your subwoofer by freeing you to place it in the best spot of your room! Now EVERY subwoofer can be a wireless subwoofer!
Senaste avsnitt
En liten tjänst av I'm With Friends. Finns även på engelska.